- Tel: +31(0)321 - 38 23 15
For commercial shipping
The MicroCommander is manufactured for the electronic control of all installations that are driven by a mechanical engine and a mechanical gearbox and can accommodate both commercial marine vessels and yachts.
After installation, the MicroCommander can be fine-tuned using the menu in the display. Among others, the direction and stroke of the push/pull cables, the throttle pause following shift, and high idle can be set.
Additionally, the MicroCommander is equipped with diagnosis software that can trace possible defects, which appear as codes in the display.
Commercial Implementation
The commercial implementation of the ZF MicroCommander comes in a robust steel housing.
Specifications
- Standard connectivity for five control stations
- A single lever for the control of the motor and gearbox
- Immobilizer
- High/Low idle
- Single lever control system for installations with multiple engines
- Engine speed synchronization for installations with multiple engines
Optionals
- Throttle ramping. This application enables the reduction of the throttle signal (ranging from 0 to 15 seconds)
- Station expander. This is a separate unit that can be added, after purchase of the installation, when more than five control stations are demanded
- Trolling. The MicroCommander can be expanded with a trolling actuator, if the gearbox is furnished with a trolling valve. The trolling actuator controls the valve, and can be added after purchase.